Wengue Finished Electric Bass Body Precision Style MB Exclusive

General description of the Wengue Unfinished Electric Bass Body Precision Style MB Exclusive:

The Wengue Unfinished Electric Bass Body Precision Style MB Exclusive is made in Spain and it is a faithful recreation of the legendary Fender™ Precision™ model. This body has been pre-routed with the usual split coil pickup configuration and is designed to use a 5-screw bridge.

The body of this bass has all the necessary routings for the electronics and hardware. The holes for the neck and bridge screws have already been drilled.

Finished with 120 grit sandpaper. The body has been sanded to remove the most obvious marks from the cutting and routing process, but it will always be necessary to sand with finer grit sandpaper before any finishing.

Wenge is a dense wood varying in colour from dark brown to purplish black with fine brown streaks. It is a very hard and heavy wood, often used for necks and fingerboards. Stiff, strong and stable, due to its large amount of oil it reduces the high frequencies but maintains the definition of notes. Some internationally renowned luthiers, such as Ervin Somogyi believe it to be one of the best woods in terms of acoustic properties.

Because each piece of wood is unique, you may receive a body whose appearance differs from the one shown in the photo, be it in color, tone, grain distribution, etc. To help you, Maderas Barber offers a Photo Purchase service that will allow you to choose exactly the piece you want. 

Routed for split-coil configuration.

Pickguard screw holes are NOT drilled.

5-bolt bridge assembly. 

Electronics cavity routed.

Prepared for 4-screws necks.

Neck pocket routed with absolute precision.

Compatible with Fender-sized necks.

This Precision body is compatible with all the Fender™ Precision™ and JazzBass™ necks in our catalogue.

Why choose MB Exclusive?

As a result of our accumulated knowledge of guitar woods and products, our brand MB Exclusive was born. After more than six decades of experience you can be sure that the wide variety of finished parts we offer, including fretboards, sides, backs, necks, bridges... are all made with the best materials and manufacturing processes.

Thanks to our constant contact with musicians and luthiers, we make products that perfectly match what you are looking for. With our finished bodies, you can be confident that you are using a high quality product that is on par with the instrument you are planning to build.

Features:

• 2 Pieces
• Botanical Name: Milettia laurentii
• Origin: Africa
• Density: 830 Kg/m³