Transparent Color Natural Oil Finished
- Natural oils 100% ecologic
- Environment y health friendly. 0% toxic emissions (0% VOC)
- Description:Â When we talk about the Rubio Monocoat range of finishes, we are talking about two products in one, base and finish. In addition, now with its improved formula, they also allow other types of varnishes that can be applied on top of the product in case we want more body or a more glossy or satin finish. The Color Transparent darkens the color of the wood and leaves a surprising wet effect on it.
Protects and colours your wood in one single layer Natural Oil Finished is a product of the newest generation which colours your wood and protects it in one layer.
The combination of the oil (A) and the accelerator (B) guarantees a quick drying.
Can also be applied as renovation and maintenance oil on surfaces which are treated with RMC Oil. - Specific characteristics:Â
∙ Colours and protects in 1 layer
∙ 40 standard colours that can be blended for unlimited possibilities
∙ Enhances the natural look and feel of the wood
∙ Does not contain any water or solvents
∙ Easy to maintain
∙ No overlaps or starting marks
∙ Durable protection
∙ Minimal use: 30 - 50 m2 /L
∙ Can be applied to almost all wood types, musical instruments, furniture as well as floors (solid wood, veneer, MDF, ...)Â
∙ Very wear-resistant
∙ Water-resistant, ideal for kitchens and bathrooms
∙ Heat-resistant
∙ Very fast curing: 80% in 2 days
∙ A short ‘dry’ maintenance period: after 5 days, the surface can be cleaned with water and soap - Technical characteristics Color Natural Oil (A):
∙ Physical state at 20°C: liquid
∙ Odour: oily
∙ Flash point: > 99°C
∙ Density: > 0,9 kg/L
∙ VOC content: 0 g/L - Technical characteristics Accelerator (B):
∙ Physical state at 20°C: liquid
∙ Colour: clear
∙ Odour: none
∙ Flash point: > 160°C (closed cup)
∙ VOC content: 0 g/L - Storage: The product can be stored up to 36 months in dry conditions and in its original packaging. Keep away from frost.Â
- Packaging: Bottle of 100 ml / Combined can of 350 ml: 275 ml Charcoal Color Natural Oil (A) and 75 ml Accelerator (B)Â
- Yiel:Â 100 ml = 4 m2 / 390 ml = 14/16 m2
- Available colours: Charcoal, Citrine, Chocolate, Emerald, Ruby, Invisible, Transparent, Midnight Indigo, Cinnamon Brown.
- Instructions for use:
∙ STEP 1. Untreated wood: sand the surface scratch-free. Vacuum thoroughly, eliminate remains of dust.
∙ STEP 2. Carefully mix the two components (1 to 2 minutes) with a ratio of appr. 3 units A to 1 unit B.
∙ STEP 3. Once the cleaned surface is dry, spread out a small quantity of Natural Oil Finished (cloth with thin beige pad). Work in zones of 5 - 10 m2
∙ STEP 4. Let absorb during a few minutes. Thoroughly remove all excess of oil (cloth with white pad) within 15 minutes per zone. The surface should feel dry! Finish all zones the same way
∙ STEP 5. In a well ventilated room, the surface can be used 24 - 36 hours after the application.Â
- Tips & Tricks:
∙ The product may NOT be diluted!
∙ Stir the product well before application. When using several containers at one site, it is recommended to mix them for an even result. - Consumption: 30 - 50 m2 /L, depending on the wood type, sanding and application method. Natural Oil Finished may be used for a maximum of 4 - 6 hours after mixing.
Reviews
No customer reviews for the moment. Log in for write a review.