Nitorlack Superfinish Polish

Nitorlack Superfinish Polish

14879
13 Items
$18.48
Tax excluded

100% secure payments

Overview Nitorlack Superfinish Polish:

This polish offered by Valresa will help us in the last phase of the buffing process, to get the maximum shine. Designed to buff all types of lacquers, either water-based, nitrocellulose or polyurethane. It is essential to shake vigorously for a few minutes before use. This polish is a fine-grained, glossy compound.

Super finish should be applied by machine, with its respective black buffing pad of 80 or 150 mm. It is not recommended to use it at more than 1200 to 1500 rpm, or else it may overheat the surface and spoil the finish. It is recommended to wipe off the excess with a damp cloth, preferably a microfiber one. Apply it after using the Nitorlack Compound Cut for a perfect finish.

Features:

  • Water-based and silicone free
  • 250 ml container
  • Flammable product. Airfreight shipment is not allowed. Only for orders shipped by road.

13 Items

Reviews

No customer reviews for the moment. Log in for write a review.

Write your review

Nitorlack Superfinish Polish

Write your review

Customers who bought this product also bought:

Black Polishing sponges 80 mm
Polishing and Pore Fillers

Black Polishing sponges 80 mm

11705
$23.87
Dimensions: 80mm Included: 5 Units Description: Sponge suitable as the last polishing step for a polishing process and maximum protection.

NITORLACK® Primer (1l)
Lacquers

NITORLACK® Primer (1l)

10723
$19.19
Quantity: 1l Description: Specially suitable product for application on sheet and solid wood of musical instruments such as guitars that requires an excellent coverage and pore moistening. Quick drying and easy manipulation process is recommended due to its good covering power and easy sanding.The nitrocellulose finish is characterize for its good fuse...
Flex Pad for sandpaper
Last items in stock
Sharpening, Sandpapers, Abrasives and Polished

Flex Pad for sandpaper

14877
$8.12
Overview Flex Pad for sandpaper: With this Flex Pad for sandpaper you will be able to use Nitorlack's flexible sandpaper without any problems, perfectly attached to the surface of the backing pad. This will allow you to sand comfortably, because we know that sanding is one of those long and tedious operations in the process of building an instrument -...
White - Black
2 Colors Purfling

White - Black Binding

7392
$1.31
Dimensions: 810x5x1 mm Wood: Sycamore & Tinted Sycamore Description: The 2 colour profiles for guitar decoration are made of 0.5 mm stained Sycamore wood veneer and are perfect for giving a personal touch to your guitar.
Flex Sandpaper 1500 Grit,...
Sharpening, Sandpapers, Abrasives and Polished

Flex Sandpaper 1500 Grit, Set of 5

14874
$6.32
Overview Flex Sandpaper 1500 Grit, Set of 5: Set of 5 flexible sandpaper sheets from Nitorlack. Its innovative material allows access to rounded areas without any problem, the material is resistant and does not split or tear. Achieves uniform sanding and saves a lot of time. Valid for both dry and wet use. Can be washed and reused. Use with the Flex Pad...
MIRKA POLARSHINE 10 - Cut...
Out-of-Stock
Polishing and Pore Fillers

MIRKA POLARSHINE 10 - Cut and polish in 1 step

10801
$22.89
Quantity: 250ml Description: It eliminates every mark of the surface and it obtains a high shine in a single step.Apply a small amount of product on a white sponge.Spread the plasticene on the surface before starting the polisher and polish linearly and uniformly.Clean up with a microfiber cloth.
View
Refuerzo Mango Grafito Eléctrica 440x8.5x4 mm.
Neck Reinforcements / Truss Rod

Graphite Neck Reinforcement for Electric Guitar

8392
$13.19
Overview Graphite Neck Reinforcement for Electric Guitar: The trend toward thinner sections in the guitar neck has made some additional reinforcement a necessity. The first attempts to make the neck more stable was by gluing two or more pieces of wood together. Then metal bars, square tubes and U-profiles and combinations of these were used. Following...

NITORLACK® Gloss Lacquer (1l)
Last items in stock
Lacquers

NITORLACK® Gloss Lacquer (1l)

10514
$19.62
Quantity: 1l Colour: Gloss Description: High gloss colourless nitrocellulose finish, specially developed for guitar painting.Unite layer by layer the varnish with the guitar, letting wood transpire without interfere or modify the guitar sound produced by the guitar body, getting a pure vibration.Great elasticity nitrocellulose, anti-cracking properties,...
DJ-25A Finished Bone for...
Finished Nuts & Saddles

DJ-25A Finished Bone for Electric Guitar

12813
$4.36
Dimension: 43x3,2x5/5,65/4,6 mm Origin: Bovine Ratio: 9,5'' Curved base Description: Bone nut for 6-string electric guitar with 9.5’’ radius curved base. Slots for pre-cut strings.
NitorLack Guitar Polish &...
Sharpening, Sandpapers, Abrasives and Polished

NitorLack Guitar Polish & Cleaner

12264
$10.25
Nitorlack Polish & Cleaner  is a  Guitar cleaner and polisher designed for the daily care of your guitar and to clean all kinds of instruments with all kinds of finishes. Guitar cleaner are the result of all our experience in making coatings for musical instrument , which is the best way to manufacture a finished guitar maintenance product. Removes,...
Product added to wishlist
Product added to compare.