African Mahogany Finished Electric Guitar Body Stratocaster Style MB Exclusive

Overview African Mahogany Unfinished Electric Guitar Body Stratocaster Style MB Exclusive:

The African Mahogany Unfinished Electric Guitar Body Stratocaster Style MB Exclusive is made in Spain and it is a faithful recreation of the legendary Fender™ Stratocaster™ model. This body has been pre-routed with the traditional three single coil configuration.

The body of this guitar has all the necessary routings for the electronics and hardware, as well as the tremolo cavity in the back. The holes for the neck and bridge screws have already been drilled.

Finished with 120 grit sandpaper. The body has been sanded to remove the most obvious marks from the cutting and routing process, but it will always be necessary to sand with finer grit sandpaper before any finishing.

African mahogany can range in color from pale pink to orange or light brown. It works well, regardless of whether we are talking about sawing, planing, gluing, staining, etc., although sometimes it's hard to sand due to its interlocked grain. It has a very open pore, which makes it essential to use a filler.

Because each piece of wood is unique, you may receive a body whose appearance differs from the one shown in the photo, be it in color, tone, grain distribution, etc. To help you, Maderas Barber offers a Photo Purchase service that will allow you to choose exactly the piece you want. 

Traditional three single coil (SSS) routing

Undrilled pickguard mounting holes

Six-screw vintage-style bridge mount

Back cavity routed

Electronics cavity routed.

Prepared for 4-screws necks.

Neck pocket routed with absolute precision.

Compatible with Fender-sized necks.

This Stratocaster™ body is compatible with all the Fender™ Stratocaster™ and Telecaster™ necks in our catalogue.

Why choose MB Exclusive?

As a result of our accumulated knowledge of guitar woods and products, our brand MB Exclusive was born. After more than six decades of experience you can be sure that the wide variety of finished parts we offer, including fretboards, sides, backs, necks, bridges... are all made with the best materials and manufacturing processes.

Thanks to our constant contact with musicians and luthiers, we make products that perfectly match what you are looking for. With our finished bodies, you can be confident that you are using a high quality product that is on par with the instrument you are planning to build.

Features:

• 2 pieces
• Botanical Name: Khaya ivorensis
• Origin: Cameroon
• Density: 490-530 Kg/m³