∙ STEP 1. Untreated wood: sand the surface scratch-free. Vacuum thoroughly, eliminate remains of dust. ∙ STEP 2. Carefully mix the two components (1 to 2 minutes) with a ratio of appr. 3 units A to 1 unit B. ∙ STEP 3. Once the cleaned surface is dry, spread out a small quantity of Natural Oil Finished (cloth with thin beige pad). Work in zones of 5 - 10 m2 ∙ STEP 4. Let absorb during a few minutes. Thoroughly remove all excess of oil (cloth with white pad) within 15 minutes per zone. The surface should feel dry! Finish all zones the same way ∙ STEP 5. In a well ventilated room, the surface can be used 24 - 36 hours after the application.
Tips & Tricks:∙ The product may NOT be diluted! ∙ Stir the product well before application. When using several containers at one site, it is recommended to mix them for an even result.
Consumption: 30 - 50 m2 /L, depending on the wood type, sanding and application method. Natural Oil Finished may be used for a maximum of 4 - 6 hours after mixing.